Smooth-Cast™ 300Q Size:Trial Kit (1.9 lbs. / 0.86 kg.) Applying A Release Agent -

Applying A Release Agent - Although not usually necessary

so operators may facilitate direct contact between the abrasive and the surface area at the exact location where it's required

Your vacuum pump must pull a minimum of 29 inches of mercury (or 1 Bar / 100 KPa)

Allow casting to come to room temperature before handling

potassium thiosulfate

Smooth-Cast™ 300Q Size:Trial Kit (1.9 lbs. / 0.86 kg.) Applying A Release Agent -Smooth Cast 300Q liquid plastic is a quick setting, ultra low viscosity casting resin that yield castings that are bright white and virtually bubble free. Vacuum degassing is not necessary. It offer the convenience of a 1A: 1B by volume or 100A: 90B by weight mix ratio. This resin readily accept fillers (such as URE FIL 3 from Smooth On) and can be colored with SO Strong or Ignite color tints (Smooth Cast 325 series accepts pigments better than the